SuperSting™ Monitoring System

Product Documents

PDF icon Product FAQ (132.7 KB)

The SuperSting™ Monitoring System is an add-on module to the SuperSting™ Wi-Fi, our multi-channel electrical imaging system. It monitors landfills, well sites, dams, and other unattended locations where changes of resistivity conditions over time must be recorded and analyzed.

This network-aware system is designed to be monitored remotely, so you can access the data no matter where you are located. Results can be automatically emailed from the server to any email address at the finish of a task, and notification email messages can be sent at start of a task. In the case of an error, alarms can be sent by email.

 

Use Cases:

  • Monitoring leaking in dams and levees

  • Monitoring leaching in landfills

  • Monitoring pollution

  • Time lapse studies for locating landslide prone areas

 

Product Features:

The system consists of a SuperSting™ system on a remote location connected to fixed measurement cables and powered by two battery banks. The deep cycle batteries are charged constantly except when used by the SuperSting™, and the battery bank is isolated from the chargers for precision measurements during operation. The server software runs on a PC on the remote location and controls measurement tasks to execute on a time schedule.

 

Parts that come with the system:

Description

Quantity

SuperSting™ Remote Interface Box

1

Battery Charger, 12V, 30A, Lead Acid

2

Cable For Remote Interface Box - Battery Connection

4

Cable For Remote Interface Box - Battery Charger Connection

2

Serial Connection Cable, Male/Female DB9 Connector

1

RS-232 Opto Isolation Module

1

Adapters For The Opto Isolation Module

2

RS-232 Serial Communication Cable

1

PC Parallel Port Cable

1

SSRemoteServer & SSRemoteClient Software On CD

1

Client PC Hardware Key (Dongle) For USB Port

1

Client PC Hardware Key (Dongle) For USB Port

1

SuperSting™ Remote Instruction Manual

1

 

You will need to purchase the following parts separately for the system:

Description

Quantity

SuperSting™ Instrument

1

High-Capacity Deep-Cycle 12V Batteries (We recommend the 12V, AGM type, 105 AmpHour battery manufactured by MK, part number MK8A31.)

2

Extra 12V, AGM Type, 105 AmpHour Battery (Manufactured by MK, part number MK8A31.)

2

SSRemote Server PC With Microsoft Windows XP-Pro Operating System

1

Internet Connection To Remote Site, Local Area Network Access To Server PC, Or Dial-In Modem Attached To Server PC (Including Normal Phone Line)

 

Uninterruptible Power Supply (UPS) For The Server PC

1

 

SuperSting Sistema de Monitoreo

Product Documents

PDF icon Product FAQ (132.7 KB)

Not sure what you need for your survey?

Marketing CTA - English

When you can see what you're working with below the surface, you can make better decisions that save you time and money.