Passive Graphite Electrode Cable
Non-corrosive graphite electrode cable designed for boat towing, underwater, harsh environments, and Marine Resistivity.
Non-corrosive graphite electrode cable designed for boat towing, underwater, harsh environments, and Marine Resistivity.
Distributed electrodes with a separate channel (U.S. Patent 6,404,203) for ultra-sensitive induced polarization (IP) measurements using external non-polarizable electrodes.
SuperSting™ R8 Wi-Fi with Tablet Controller - Qty 1
Cable with 14 electrodes (6.25m electrode spacing) - Qty 8 (making a total of 112 electrodes)
SwitchBox Grid - Qty 1
Key to use EarthImager™ Software (Your choice of 2D or 3D) - Qty 1
Free admission for one person: 3-day training seminar (airfare & lodging not included) - Qty 1
The OBEi1 Deep Marine is a state-of-the-art ocean-bottom electrical imager. A remotely operated underwater vehicle (ROV) carries the OBEi1 and is pulled behind a boat with a cable system at roughly one kilometer in depth. The cable—which typically spans approximately 1 kilometer behind the ROV—uses a Kevlar-strength member, water block inner seal, and rugged marine jacket. The OBEi1 sensor has 56 AGI graphite electrodes (US patent 6,674,286) available in custom spacings.
The SuperSting™ Monitoring System is an add-on module to the SuperSting™ Wi-Fi, our multi-channel electrical imaging system. It monitors landfills, well sites, dams, and other unattended locations where changes of resistivity conditions over time must be recorded and analyzed.
This network-aware system is designed to be monitored remotely, so you can access the data no matter where you are located.
Monitoring leaking in dams and levees
Electrically-stable, non-polarizable electrodes used for precise, sensitive low-voltage measurements.
Alerts onlookers that an electrical resistivity imaging survey is in progress. Warnings in 3 languages. (English, Spanish and Chinese)